MyActuator RMD-H-70-15-200-C vs R60 KV115

The MyActuator RMD-H-70-15-200-C has more continuous torque (0.8 N·m against 0.75 N·m) and a higher torque constant (0.18 N·m/A against 0.083 N·m/A), and draws less current at its rating (4.4 A against 9 A). The R60 KV115 has more peak torque (2.3 N·m against 2 N·m), and is lighter (248 g against 470 g) and narrower (69 mm against 70 mm).

The MyActuator RMD-H-70-15-200-C is US$295 and the R60 KV115 is US$200. That is US$368.75 per rated N·m for the MyActuator RMD-H-70-15-200-C and US$266.67 per rated N·m for the R60 KV115.

Which to buy

Every published specification

MyActuator RMD-H-70-15-200-CR60 KV115
Reduction Ratio1:11:1
Rated Torque (N·m)0.80.75
Peak Torque (N·m)22.3
Rated Voltage (V)4848
Rated Power (W)200—
Rated Speed (RPM)2400—
No-Load Speed (RPM)2800—
OD (mm)7069
Height (mm)49.5—
Weight (g)470248
Rated Current (A)4.49
Peak Current (A)13.228
No-Load Current (A)0.18—
Kt (N·m/A)0.180.083
Ke (V/kRPM)17—
Pole Pairs13—
Inertia (g·cm²)1800—
Cogging Torque (mN·m)31—
Winding Resistance (Ω)0.5—
Winding Inductance (mH)0.55—
Winding TypeY—
Max Axial Load (kN)1.87—
Max Radial Load (kN)0.44—
Efficiency>84%—
Repeat Positioning Accuracy<0.01°—
Encoder TypeABS 17-bit—
Rotor TypeOuter rotorOuter rotor
CommunicationCAN BUS—
Insulation ClassF—
Continuous Torque Max Speed (RPM)—4150
Kv (RPM/V)—115
Hall Sensor—Yes
Driving Way—FOC
Application—AGV, AMR

Rows the two disagree on are marked; the figures are CubeMars'. To put any other two parts side by side, build your own comparison.