The AK60-6 V3.0 KV80 has a higher torque constant (0.135 N·m/A against 0.11937 N·m/A), draws less current at its rating (3.8 A against 4 A), is lighter (380 g against 460 g), narrower (79 mm against 80 mm) and shallower (43 mm against 51.2 mm), and turns faster at the output (233/490 RPM against 200/400 RPM). They match on continuous torque and peak torque.
The AKA60-6 KV80 is US$335 and the AK60-6 V3.0 KV80 is US$335. That is US$111.67 per rated N·m for the AKA60-6 KV80 and US$111.67 per rated N·m for the AK60-6 V3.0 KV80.
| AKA60-6 KV80 | AK60-6 V3.0 KV80 | |
|---|---|---|
| Number of Encoder | 1 | 1 |
| Reduction Ratio | 6:1 | 6:1 |
| Rated Torque (N·m) | 3 | 3 |
| OD (mm) | 80 | 79 |
| Weight (g) | 460 | 380 |
| Peak Torque (N·m) | 9 | 9 |
| Rated Voltage (V) | 24/48 | 24/48 |
| Motor Constant Km (N·m/√W) | 0.1541 | 0.15 |
| Rated Speed (RPM) | 200/400 | 233/490 |
| No-Load Speed (RPM) | 320/640 | — |
| Rated Current (A) | 4 | 3.8 |
| Peak Current (A) | 11.2 | 0.3/11.2 |
| Height (mm) | 51.2 | 43 |
| Kv (RPM/V) | 80 | 80 |
| Kt (N·m/A) | 0.11937 | 0.135 |
| Ke (V/kRPM) | 0.0125 | 12.5 |
| Phase to Phase Resistance (mΩ) | 595 | 595 |
| Phase to Phase Inductance (μH) | 675 | 676 |
| Inertia (g·cm²) | 331.91 | 243.5 |
| Mechanical Time Constant (ms) | 2.5 | 0.81 |
| Electrical Time Constant (ms) | 1.13 | 0.69 |
| Pole Pairs | 14 | 14 |
| Winding Type | Star | Star Backlash (°) 0.55 |
| Operation Ambient Temperature | (℃) -20℃~50℃ | -20℃~50℃ |
| Driving Way | FOC | FOC |
| Application | WheeledRobot, AGV | Legged Robot, Exoskeleton, AGV |
| Maximum Torque Weight Ratio (N·m/kg) | — | 23.68 |
| Back Drive (N·m) | — | 0.2 |
| Inner Loop Encoder Type | — | Magnetic Encoder |
| Inner Ring Encoder Resolution | — | 16bit |
| CAN Connector | — | XT30PW(2+2)-M |
| UART Connector | — | A1257WR-S-3P |
| Temperature Sensor | — | NTC MF51B 103F3950 |
Rows the two disagree on are marked; the figures are CubeMars'. To put any other two parts side by side, build your own comparison.